Enclave AWD V6-3.6L (2009)
2. Install the MAF/IAT sensor (2) to the air cleaner assembly.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the MAF/IAT sensor screws (1).
Tighten the screws to 4 Nm (35 lb in).
4. Connect the engine wiring harness electrical connector (4) to the MAF/IAT sensor.
5. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (See: Fuel Delivery and Air Induction/Air Cleaner Housing/Air
Cleaner Fresh Air Duct/Hose/Service and Repair).
