Enclave AWD V6-3.6L (2009)
Caution: Refer to Torque Reaction Against Timing Drive Chain Caution (See: Timing Components/Service Precautions)
Note:
*
Use an open-end wrench at the camshaft hex to prevent camshaft/engine rotation.
*
DO NOT remove the camshaft position actuator bolt at this time.
7. Loosen the camshaft position actuator bolt.
8. Unscrew the EN-48313 so the legs of the tool are retracted.
9. Insert the EN-48313 between the camshaft actuators, rearward of the timing chain until the top line that is scribed in the body of the tool (1) is
adjacent to the top surface of the cylinder head (2). This is the approximate installed position.
