Enclave AWD V6-3.6L (2009)
Ignition Coil: Service and Repair
Ignition Coil(s) Replacement - Bank 2
Ignition Coil Replacement - Bank 2
Removal Procedure
1. Remove the intake manifold. Refer to Intake Manifold Replacement (See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and
Repair)
2. Disconnect the engine wiring harness electrical connector(s) (5) from the ignition coil(s) (4).
3. Remove the ignition coil bolt(s).
4. Remove the ignition coil(s).
Installation Procedure