Enclave AWD V6-3.6L (2009)
8. Connect the fuel sender wiring harness electrical connector (3) to the fuel tank module.
9. Connect the fuel sender wiring harness electrical connector (2) to the fuel tank pressure sensor.
10. Position the fuel pump fuel feed line and the EVAP canister vent front pipe to the fuel tank.
11. Connect EVAP canister vent front pipe quick connect fitting (4) to the fuel tank module. Refer to Plastic Collar Quick Connect Fitting Service (
See: Fuel Delivery and Air Induction/Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
12. Connect the fuel pump fuel feed line quick connect fitting (1) to the fuel tank module. Refer to Plastic Collar Quick Connect Fitting Service (See:
Fuel Delivery and Air Induction/Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
13. Install the fuel tank. Refer to Fuel Tank Replacement (See: Fuel Delivery and Air Induction/Fuel Tank/Service and Repair).
