buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Voice Recognition System - Won't Recognize Bluetooth(R)|Page 528 > < Starter Relay|Locations
Page 1
background image

Steering Mounted Controls Communication Module: Technical Service Bulletins
Voice Recognition System - Won't Recognize Bluetooth(R)

INFORMATION

Bulletin No.: 08-08-44-024

Date: June 27, 2008

Subject: Voice Recognition System Will Not Recognize "Bluetooth" Command

Models:
2009 Buick Enclave
2009 Cadillac CTS, SRX
2009 Chevrolet Avalanche, Cobalt, Corvette, Equinox, HHR, Silverado, Suburban, Tahoe, Traverse
2009 GMC Acadia, Sierra, Yukon
2009 Pontiac G5, Solstice, Torrent
2009 Saturn OUTLOOK, SKY, VUE
with UE1 (OnStar) but Without UPF (Bluetooth)
2009 Cadillac STS with UE1 (OnStar) and YQ4 (Bluetooth in Nav Radio)

On vehicles not equipped with Bluetooth, the voice recognition system will not recognize the "Bluetooth" command even though the voice prompts
indicate "Bluetooth" is an option.

Description

Proper Operation

In the voice recognition menu (entered through the Steering Wheel Control Switch), the customer says "Bluetooth." If the vehicle is equipped with
Bluetooth (all except STS), a "Bluetooth Ready" audio prompt will play.

If the vehicle consistently responds with "Pardon" or some other response, then the vehicle does not have the Bluetooth functionality (UPF Option code).
The UPF option has to be factory installed in order for the "bluetooth" command to function (all except STS).

Typical Customer Experience

Enter into the voice recognition menu through the Steering Wheel Control Switch (For vehicle specific instructions on how to enter the voice recognition
menu, reference the vehicle owner's guide.) Here is the expected dialogue:

^ System Response: "Ready"
^ Customer says, "Bluetooth"
^ System Response: "Pardon"
^ Customer says, "Bluetooth"
^ System response: "Sorry I didn't get that. You can say dial, store, call, Bluetooth, more commands, help, or goodbye".
^ Customer says, "Bluetooth"
^ System Response: "Pardon"
^ Customer says, "Bluetooth"
^ System Response: "Thank you. Goodbye" and the session is ended.

Important:

When the customer says, "Bluetooth" in a vehicle without the Bluetooth feature, this may also disable the system's ability to respond to the "more help"
command.

Please instruct customers not to attempt Bluetooth functionality if their vehicle is not equipped with the option.

STS Only

The STS may experience the same condition as stated above even if the vehicle is equipped with the YQ4 (Bluetooth/Nav Radio) option if the voice
recognition mode is entered through the steering wheel control. The STS has the Bluetooth functionality as part of the Navigation Radio, and Bluetooth
must be entered from the radio itself.

To enter Bluetooth mode on the STS:

1. PRESS the CONFIG hard key on the radio.

Voice Recognition System - Won't Recognize Bluetooth(R)|Page 528 > < Starter Relay|Locations