Enclave AWD V6-3.6L (2009)
are urged to limit the use of this report to the follow-up necessary to complete this program.
Parts Information
It is anticipated that there will be no parts required for this program. In the rare event that a safety belt buckle does need replacing, please obtain the
appropriate part from General Motors Customer Care and Aftersales (GMCC&A). Normal orders should be placed on a DRO = Daily Replenishment
Order. In an emergency situation, parts should be ordered on a CSO = Customer Special Order.
Service Procedure
1. Inspect all 2nd row seat assemblies for proper function.
Note
Test the operation of the belt buckle. Latch the buckle and pull on the seat belt to ensure the seat belt functions properly.
2. Verify proper functioning of the belt buckles and visually inspect each buckle/release button for damage. Refer to the illustration for an example of
a damaged buckle.
-
If evidence of buckle damage such as a bent or cracked plastic housing is found, or if stressed witness marks are visible on the housing, replace
the seat belt buckle. Refer to Rear Seat Belt Buckle Replacement in SI, and then continue on and complete the trim cover rework procedure
below.
-
If no buckle damage is found, complete the trim cover rework below on the seat(s).
Left hand bucket seat in its normal seating position.