Enclave AWD V6-3.6L (2009)
5. Position the battery negative cable extension cable terminal (1) to the cylinder head.
6. Install the battery negative cable extension cable ground bolt (2) to the cylinder head.
Tighten the bolt to 58 Nm (43 lb ft).
7. Install the engine wiring harness to the battery negative cable extension cable clip (2).
8. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine
Performance Checks/Air Cleaner Housing/Service and Repair).
9. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Service and Repair).