Enclave AWD V6-3.6L (2009)
Power Steering Line/Hose: Service and Repair
Power Steering Cooler Pipe/Hose Replacement
Power Steering Cooler Pipe/Hose Replacement
Removal Procedure
1. Remove the right front frontwards wheelhouse liner. Refer to Front Wheelhouse Front Liner Replacement (Traverse) ()Front Wheelhouse Front
Liner Replacement (Outlook) ().
2. Place drain pans under the vehicle as needed.
3. Loosen the power steering cooler pipe clamp (2) and disconnect the power steering cooler pipe (3) from the power steering fluid cooler (1).
4. Remove the power steering gear outlet hose bracket bolt (1).
5. Remove and discard the power steering gear outlet hose clamp (2).
6. Disconnect the power steering cooler pipe from the power steering gear outlet hose (4,3).