Enclave AWD V6-3.6L (2009)
Steering Shaft: Service and Repair
Intermediate Steering Shaft Boot Replacement
Intermediate Steering Shaft Boot Replacement
Removal Procedure
Caution: Secure the steering wheel utilizing a strap to prevent rotation. Locking of the steering column will prevent damage and a possible
malfunction of the SIR system. The steering wheel must be secured in position before disconnecting the following components:
*
The steering column
*
The intermediate shaft
*
The steering gear
After disconnecting these components, do not move the front tires and wheels. Failure to follow these procedures may cause improper alignment
of some components during installation and result in possible damage to the SIR coil.
1. Turn the steering wheel to the straight forward position and lock it in place.
2. Remove the left front tire/wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
3. Disengage the intermediate steering shaft boot from the steering gear and the intermediate steering shaft upper seal.
4. Remove the intermediate steering shaft bolt (1) and separate the intermediate steering shaft from the steering gear.
