Enclave AWD V6-3.6L (2009)
Cross-Member: Service and Repair
Radiator Crossmember Replacement
Radiator Crossmember Replacement
Removal Procedure
1. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement (Acadia) (See: Body and Frame/Bumper/Front Bumper/Front
Bumper Cover / Fascia/Service and Repair/Front Bumper Fascia Replacement)Front Bumper Fascia Replacement (Enclave) (See: Body and
Frame/Bumper/Front Bumper/Front Bumper Cover / Fascia/Service and Repair/Front Bumper Fascia Replacement)Front Bumper Fascia
Replacement (OUTLOOK) (See: Body and Frame/Bumper/Front Bumper/Front Bumper Cover / Fascia/Service and Repair/Front Bumper Fascia
Replacement)Front Bumper Fascia Replacement (Traverse) (See: Body and Frame/Bumper/Front Bumper/Front Bumper Cover / Fascia/Service
and Repair/Front Bumper Fascia Replacement).
2. Tie the condenser radiator fan module to the upper bumper support.
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Wheels and Tires/Vehicle Lifting/Service and Repair).
4. Remove the power steering cooler nuts (2).
5. Position the power steering cooler (1) securely out of the way.