Enclave AWD V6-3.6L (2009)
6. Install the jounce bumpers and springs to the rear suspension crossmember. Refer to Rear Spring, Insulator, and Jounce Bumper Replacement (
See: Suspension Spring ( Coil / Leaf )/Service and Repair/Rear Suspension Coil Spring) for proper spring installation.
7. With the rear suspension crossmember mounted on a suitable stand and with the aid of an assistant, carefully lower the vehicle or raise the rear
suspension crossmember into location on the vehicle.
8. Install the four bolts securing the rear suspension crossmember to vehicle.
Tighten the bolts to 170 Nm (125 lb ft).