Enclave AWD V6-3.6L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Tighten the nut for the bolt from the knuckle to the adjuster link to 75 Nm (55 lb ft) plus 60 degrees.
Note: In steps 4 and 5, finger tighten the bolts. This will allow the alignment of the mounting holes in the control arms and the knuckle.
4. Install the bolt from the upper control arm to the knuckle and tighten to 100 Nm (74 lb ft) plus 90 degrees.
