Enclave AWD V6-3.6L (2009)
29. Remove the stabilizer shaft. Refer to Stabilizer Shaft Insulator Replacement (See: Stabilizer Bar/Stabilizer Bushing/Service and Repair/Front
Suspension).
30. Remove the lower control arms. Refer to Lower Control Arm Replacement (See: Control Arm/Service and Repair/Front Suspension).
31. Remove the frame insulators from the frame. Refer to Front Frame Cushion or Insulator Replacement (See: Body and Frame/Frame/Body /
Frame Mount Bushing/Service and Repair/Front Frame Cushion or Insulator Replacement) and Rear Frame Cushion or Insulator Replacement (
See: Body and Frame/Frame/Body / Frame Mount Bushing/Service and Repair/Rear Frame Cushion or Insulator Replacement).
Installation Procedure
1. Install the frame insulators to the frame. Refer to Front Frame Cushion or Insulator Replacement (See: Body and Frame/Frame/Body / Frame
Mount Bushing/Service and Repair/Front Frame Cushion or Insulator Replacement) and Rear Frame Cushion or Insulator Replacement (See:
Body and Frame/Frame/Body / Frame Mount Bushing/Service and Repair/Rear Frame Cushion or Insulator Replacement).
2. Install the lower control arms. Refer to Lower Control Arm Replacement (See: Control Arm/Service and Repair/Front Suspension).
3. Install the stabilizer shaft. Refer to Stabilizer Shaft Insulator Replacement (See: Stabilizer Bar/Stabilizer Bushing/Service and Repair/Front
Suspension).