Enclave AWD V6-3.6L (2009)
Note: If installing the front strut after servicing another steering or suspension component, align the front strut to the scribe mark on the steering
knuckle.
4. Position the front strut on the steering knuckle.
5. Install the front strut to steering knuckle mounting nuts and bolts.
Tighten the mounting nut to 195 Nm (144 lb ft).
6. Install the stabilizer link at the front strut. Refer to Stabilizer Shaft Link Replacement (See: Stabilizer Bar/Stabilizer Link/Service and
Repair/Front Suspension).