Enclave AWD V6-3.6L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the retaining bolts for the wheel bearing and hub.
Tighten the bolts to 140 Nm (103 lb ft).
3. Install the front brake rotor. Refer to Front Brake Rotor Replacement (See: Brakes and Traction Control/Disc Brake System/Brake
Rotor/Disc/Service and Repair/Removal and Replacement/Front Brake Rotor Replacement).
4. Install the wheel drive shaft retaining nut and washer. Refer to Front Wheel Drive Shaft Replacement (See: Transmission and Drivetrain/Drive
Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Front Wheel Drive Shaft Replacement).
5. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
6. Remove the support and lower the vehicle.
