Enclave AWD V6-3.6L (2009)
Fluid Line/Hose: Service and Repair
Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
Special Tools
*
J 28585 Universal Snap Ring Remover for the 5/8 inch Line
*
J 41623-B 3/8 inch Line Quick Release Tool
Removal Procedure
1. Remove the plastic caps from the quick connect fittings by pulling the caps back along the pipe before installation.
2. Install the J 41623-B onto the transmission oil cooler (TOC) pipe, or use theJ 28585
3. Slide the J 41623-B toward the TOC pipe fitting, or use the J 28585