Enclave AWD V6-3.6L (2009)
3. Using a suitable jack stand support the torque tube assembly.
4. Hand tighten the torque tube to differential bolts (1) before torquing to specifications.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
5. Torque the mounting bolts (1) to specifications.
Tighten the bolts to 55 Nm (40 lb ft).
6. Install the clutch control module, if needed. Refer to Rear Differential Clutch Control Module Replacement (See: Differential
Assembly/Differential Lock/Control Unit/Service and Repair).
7. Install the electrical connector for the clutch control module.
8. Using the jack stand or the aide of an assistant reposition the torque tube to allow installation of the mounting bolt.
