Enclave AWD V6-3.6L (2009)
Control Unit: Service and Repair
Rear Differential Clutch Control Module Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the propeller shaft assembly. Refer to Propeller Shaft Replacement (See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller
Shaft/Service and Repair).
3. Remove the torque tube mounting bolt.
Note: DO NOT allow the torque tube to hang, support with a suit stand.
4. Lower the torque tube to gain access to the clutch control module.