Enclave AWD V6-3.6L (2009)
Front Door Window Regulator: Service and Repair
Front Side Door Window Regulator Replacement
Removal Procedure
Warning: Refer to Express Window Down Warning (See: Service Precautions).
Warning: Refer to Glass and Sheet Metal Handling Warning (See: Body and Frame/Service Precautions/Technician Safety
Information/Glass and Sheet Metal Handling Warning).
Note: If servicing the left front door window regulator it MUST be serviced as assembly because of the window express feature. The right door is
serviced as regulator or motor.
1. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement - Left Side (Traverse) (See: Body and Frame/Doors, Hood and
Trunk/Doors/Front Door/Front Door Panel/Service and Repair)Front Side Door Trim Panel Replacement - Left Side (Acadia) (See: Body and
Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair)Front Side Door Trim Panel Replacement - Left Side
(Enclave) (See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair)Front Side Door Trim Panel
Replacement - Left Side (OUTLOOK) (See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair)
or Front Side Door Trim Panel Replacement - Right Side (Traverse) (See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front
Door Panel/Service and Repair)Front Side Door Trim Panel Replacement - Right Side (Acadia) (See: Body and Frame/Doors, Hood and
Trunk/Doors/Front Door/Front Door Panel/Service and Repair)Front Side Door Trim Panel Replacement - Right Side (Enclave) (See: Body and
Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair)Front Side Door Trim Panel Replacement - Right Side
(OUTLOOK) (See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair).
2. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement (See: Body and Frame/Doors, Hood and Trunk/Doors/Front
Door/Front Door Panel/Service and Repair).
3. Remove the energy absorber retainers and energy absorber from the door.
4. Remove the to covers that conceal the holes for the regulator bolts.
5. Remove the window guide to regulator bolts. Refer to Front Side Door Window Replacement (See: Window Glass/Front Door Window
Glass/Service and Repair).
6. Raise and support the window in the full up position.
7. Disconnect the electrical connector from the regulator motor.
8. Loosen the upper bolt (3) that retains the regulator to the upper inner door.
9. Remove the nut (2) that retains the motor to the door.
10. Remove the lower bolts (1) that retain the regulator to the door.
11. Rotate the upper portion of the regulator (5) forward.
12. Beginning with the lower portion, remove the regulator through the door opening.
13. Transfer the power window motor (6).
Installation Procedure