Enclave FWD V6-3.6L (2008)
Cowl Moulding / Trim: All Technical Service Bulletins
Body - Air Inlet Grille Panel Side Cowl Not Attached
TECHNICAL
Bulletin No.: 09-08-111-006
Date: September 14, 2009
Subject: Air Inlet Grille Panel Side Cowl Not Attached to Fender (Clean and Reattach Panel to Fender)
Models:
2008-2009 Buick Enclave
Condition
Some customers may comment that the air inlet grille panel side cowl is not attached to the fender. This is located on driver side by the top of the fender
and the lower windshield.
Correction
1. Verify the customer's concern.
2. Wipe both surfaces with an alcohol wipe or equivalent alcohol substance (1).
3. Apply Adhesive Promoter 3M #4298 or equivalent.
