Enclave FWD V6-3.6L (2008)
Front Door Window Regulator: Service and Repair
Front Side Door Window Regulator Replacement
Removal Procedure
Caution: Refer to Express Window Down Caution.
Caution: Refer to Glass and Sheet Metal Handling Caution.
Important: If servicing the left front door window regulator it MUST be serviced as assembly because of the window express feature.
The right door is serviced as regulator or motor.
1. Remove the door trim panel.
2. Remove the water deflector.
3. Remove the energy absorber retainers and energy absorber from the door.
4. Remove the to covers that conceal the holes for the regulator bolts.
5. Remove the window guide to regulator bolts.
6. Raise and support the window in the full up position.
7. Disconnect the electrical connector from the regulator motor.
8. Loosen the upper bolt (3) that retains the regulator to the upper inner door.
9. Remove the nut (2) that retains the motor to the door.
10. Remove the lower bolts (1) that retain the regulator to the door.
11. Rotate the upper portion of the regulator (5) forward.
12. Beginning with the lower portion, remove the regulator through the door opening.
13. Transfer the power window motor (6).
Installation Procedure
