Enclave FWD V6-3.6L (2008)
12. Install rivets between the upper and lower plenums.
13. Remove the excess adhesive from the rivet bond area.
14. Locate the remaining holes in the upper plenum. Plug weld accordingly.
15. Clean and prepare all of the welded surfaces.
16. Apply the sealers and anti-corrosion materials to the repair area, as necessary. Refer to Anti-Corrosion Treatment and Repair.
17. Paint the repaired area. Refer to Basecoat/Clearcoat Paint Systems.
18. Install all of the related panels and components.
19. Connect the negative battery cable.
20. Enable the SIR system. Refer to SIR Disabling and Enabling.
