Enclave FWD V6-3.6L (2008)
10. Lift upward on the sunshade (1) removing it from the bracket (2).
Important: The sunshade must be removed from the top of the vehicle.
11. Remove the sunshade from outside of the vehicle.
Installation Procedure
Important: If the sunshade spring releases, it will be necessary to rewind it.
1. If the sunshade spring released turn the sunshade roller end slot 20 times in the counterclockwise direction. Insert a suitable tool (1) into the
sunshade cam locking hole (2).
2. Install the sunshade to the vehicle from the passengers side.