Enclave FWD V6-3.6L (2008)
Sunroof / Moonroof Panel: Service and Repair
Roof Stationary Window Replacement
Roof Stationary Window Replacement
Tools Required
*
J 24402-A Glass Sealant (Cold Knife) Remover
*
J 39032 Stationary Glass Removal Tool
*
Urethane Adhesive Kit GM P/N 12346392 or Equivalent
*
Isopropyl Alcohol or Equivalent
*
Cartridge-type Caulking Gun
*
Commercial-type Utility Knife
*
Razor Blade Scraper
*
Suction Cups
*
Plastic Paddle
Removal Procedure
Caution: Refer to Cracked Window Caution.
1. Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
Caution: Refer to Defroster Outlet Caution.
2. Cover the following parts to protect from broken glass:
*
Upper dash pad
*
Defroster outlets and A/C outlets
*
Seats and carpeting
Caution: Refer to Glass and Sheet Metal Handling Caution.
Important: The roof window reveal molding is a one piece molding and fills the cavities between the body and the roof window (1).
3. If equipped, inspect the roof window reveal molding for damage. If the roof window reveal molding is damaged or becomes detached from the
window, the reveal molding cannot be reused and must be replaced.
