Enclave FWD V6-3.6L (2008)
Power Seat Drive Cable: Customer Interest
Interior - Driver's Power Seat is Inoperative
TECHNICAL
Bulletin No.: 07-08-50-013A
Date: September 23, 2010
Subject: Front Driver Power Seat Inoperative, Driver Seat Will Not Move Forward or Backward (Replace Horizontal Motor Drive Cable)
Models:
2008-2011 Buick Enclave
2007-2011 GMC Acadia
2007-2010 Saturn OUTLOOK
Equipped with 6-Way Power Seat (RPO AG1) or 8-Way Memory Seat (RPO AG3)
Supercede:
This bulletin is being revised to update the model years and parts information. Please discard Corporate Bulletin Number 07-08-50-013 (Section 08 -
Body and Accessories).
Condition
Some customers may comment that the front driver power seat will not move forward or backward.
Cause
This condition may be caused by the horizontal motor drive cable breaking apart.
Correction
Replace the horizontal motor drive cable using the procedure below.
1. Remove the front driver seat from the vehicle. Refer to the Bucket Seat Replacement procedure in SI.
2. Place the seat upside down on a clean workbench.
3. Locate the horizontal motor drive cable (1) mounted in the motor bracket (2).
4. Using a standard screwdriver, carefully pry up on the plastic drive cable housing to unsnap from the motor bracket.
5. Remove the drive cable from the horizontal motor and transmission. Ensure that all cable fragments are removed before proceeding.
