Enclave FWD V6-3.6L (2008)
Rear Door Weatherstrip: Customer Interest
Body - Rear Door Weatherstrip is Loose
Bulletin No.: 07-08-66-007
Date: August 30, 2007
TECHNICAL
Subject:
Rear Door Weatherstrip Loose (Apply Adhesive)
Models:
2008 Buick Enclave
Condition
Some customers may comment that the primary weatherstrip is loose on the upper rear corner of the rear doors.
Correction
Clean the weatherstrip and door thoroughly with denatured alcohol.
Apply a thin, even coat of *3M Super Weather-strip Adhesive Black to the weatherstrip and door surfaces and allow to dry.
Apply a second thin coat to the door surface and weatherstrip. Insert the weatherstrip onto the metal post and bond immediately.
Closing the door will hold the weatherstrip in place until the adhesive has set. Leave the door closed approximately 2 hours.
*We believe this source and their products to be reliable. There may be additional manufacturers of such products.
General Motors does not endorse, indicate any preference for or assume any responsibility for the products from this firm or for any such items which
may be available from other sources.
Parts Information
Warranty Information
