Enclave FWD V6-3.6L (2008)
5. Carefully lift the BPMV assembly upward to release the BPMV from the bracket.
6. Remove the BPMV bracket.
7. Remove the 2 upper BPMV bracket insulators.
Inspect the bracket insulators for damage and replace, if necessary.
8. Remove the lower BPMV bracket insulator.
Inspect the bracket insulator for damage and replace, if necessary.
Installation Procedure
1. Install the lower BPMV bracket insulator.
Use denatured alcohol on the BPMV bracket insulator as an installation aid, if necessary.
2. Install the 2 upper BPMV bracket insulators.
Use denatured alcohol on the BPMV bracket insulators as an installation aid, if necessary.
3. Install the BPMV bracket to the BPMV.
Notice: Refer to Fastener Notice .