Enclave FWD V6-3.6L (2008)
Brake Rotor/Disc: Specifications
Front Brakes
Rotor Minimum Thickness * ................................................................................................................................................................ 27.5 mm (1.08 in)
Rotor Thickness (new) ......................................................................................................................................................................... 29.0 mm (1.14 in)
Rotor Maximum Allowable Assembled Lateral Runout ..................................................................................................................... 0.06 mm (0.002 in)
Rotor Maximum Allowable Scoring ................................................................................................................................................... 1.50 mm (0.059 in)
Rotor Maximum Allowable Thickness Variation ............................................................................................................................. 0.025 mm (0.001 in)
Rear Brakes
Rotor Minimum Thickness * ................................................................................................................................................................ 18.4 mm (0.72 in)
Rotor Thickness (new) ............................................................................................................................................................................ 20 mm (0.79 in)
Rotor Maximum Allowable Assembled Lateral Runout ..................................................................................................................... 0.06 mm (0.002 in)
Rotor Maximum Allowable Scoring ................................................................................................................................................... 1.50 mm (0.059 in)
Rotor Maximum Allowable Thickness Variation ............................................................................................................................. 0.025 mm (0.001 in)
*
All brake rotors have a minimum thickness dimension cast into them. Replace any rotor that is worn or machined below this specification.