Enclave FWD V6-3.6L (2008)
5. Position the park brake cable routing clip to the floor stud.
6. Position the driver floor carpet to the vehicle floor.
7. Install the driver footrest.
Notice: Refer to Fastener Notice .
8. Install the 2 driver footrest nuts.
Tighten the nuts to 10 N.m (89 lb in).
9. Connect the park brake warning indicator switch electrical connector.
10. Install the driver side front carpet retainer. Refer to Front Carpet Retainer Replacement .
11. Install the left side instrument panel insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side (Acadia) Instrument Panel
Insulator Panel Replacement - Left Side (Enclave) Instrument Panel Insulator Panel Replacement - Left Side (Outlook) .
