Enclave FWD V6-3.6L (2008)
6. Disconnect the park brake cable eyelet (1) from the park brake actuator.
7. Compress the locking tabs and pull the park brake cable conduit toward the front of the vehicle to compress the park brake cable spring.
8. Remove the park brake cable from the cable bracket (2).
9. Pull the park brake cable through the cable guides and remove the park brake cable from the vehicle.
Installation Procedure
1. Install the park brake cable to the cable guides.
2. Connect the park brake cable eyelet (1) to the park brake actuator.
3. Compress the park brake cable spring and install the park brake cable to the cable bracket (2).
Ensure the locking tabs on the cable conduit are fully engaged to the cable bracket.
