Enclave FWD V6-3.6L (2008)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Engine Coolant Temperature Sensor Replacement
Removal Procedure
1. Drain the cooling system. Refer to Cooling System Draining and Filling (Vac N Fill) Cooling System Draining and Filling (Static Fill).
2. Slide the electrical connector heat shield up the wiring harness.
3. Disconnect the engine wiring harness electrical connector (8) from the engine coolant temperature (ECT) sensor (9).
4. Remove the ECT sensor.
Installation Procedure