Enclave FWD V6-3.6L (2008)
5. Connect the map sensor electrical connector (2).
6. Install the engine harness bracket retaining bolt (1).
7. Connect the ETC electrical connector (5).
8. Install the brake booster vacuum hose (4) to the intake manifold.
9. Connect the intake manifold tuning valve electrical connector (3).
10. Connect the PCV line (2) to the top of the intake manifold.
11. Connect the EVAP canister purge line (1).
12. Install the intake manifold insulator. Refer to Intake Manifold Insulator Replacement (See: ) .
13. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
14. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel Injector/Service and Repair/Fuel Injector Sight Shield Replacement) .