Enclave FWD V6-3.6L (2008)
10. Insert the EN-48313 between the camshaft actuators, rearward of the timing chain until the top line that is scribed in the body of the tool (1) is
adjacent to the top surface of the cylinder head (2). This is the approximate installed position.
Important: The engine front cover is removed for clarity in the following graphics, but NOT required to perform the procedure.
11. Ensure that the feet (2) on the legs of the tool are facing the front of the engine.
12. Partially expand the legs (1) of the EN-48313 by turning the T-shaped handle clockwise.
13. Continue expanding the EN-48313 until the feet (2) contact the timing chain. Do not tighten at this time.
Important: Ensure that the foot (1) of the EN-48313 is engaged into one of the link pockets to prevent chain slippage during tightening of the
EN-48313. Do not allow the body of the EN-48313 to rotate when tightening the T-handle.
14. Hand tighten the EN-48313.
