Buick Workshop Service and Repair Manuals > Enclave FWD V6-3.6L (2008) > Engine, Cooling and Exhaust | Engine | Timing Components | Variable Valve Timing | Variable Valve Timing Solenoid | Component Information | Service and Repair | Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 1 (Right Side) Intake

Page 1

Variable Valve Timing Solenoid: Service and Repair
Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 1 (Right Side) Exhaust

CAMSHAFT POSITION ACTUATOR SOLENOID VALVE SOLENOID REPLACEMENT - BANK 1 (RIGHT SIDE) EXHAUST

Removal Procedure

1. Disconnect the engine wiring harness electrical connector (5) from the bank 1 exhaust camshaft position (CMP) actuator solenoid valve.

2. Remove the CMP actuator solenoid valve bolt and valve (1).
3. Inspect the CMP actuator solenoid valve seal and replace as necessary.

Installation Procedure

Buick Workshop Service and Repair Manuals