Enclave FWD V6-3.6L (2008)
8. Remove the suction hose/pipe nut (1) from TXV tube.
9. Disconnect the suction hose/pipe from the TXV tube (2).
10. Remove the suction hose/pipe.
11. Remove and discard the suction hose/pipe O-rings.
Installation Procedure
1. Install new O-rings to the suction hose/pipe.
2. Connect the suction hose/pipe to the TXV tube.
Notice: Refer to Fastener Notice.
3. Install the suction hose/pipe to TXV nut (1).
Tighten the bolt to 9 N.m (80 lb in).
