Enclave FWD V6-3.6L (2008)
2. Install the auxiliary A/C evaporator tubes (3) to the clamps (2).
Notice: Refer to Fastener Notice.
3. Install the heater/A/C tubes retaining nut (1) to the retaining studs and clips (2) along the frame in four places.
Tighten the nut to 7 N.m (62 lb in).
4. Install the auxiliary A/C evaporator tubes (2) to the TXV tube and condenser tube and install the retaining nuts (1).
Tighten the nut to 16 N.m (12 lb ft).
5. Install air cleaner duct. Air Cleaner Outlet Duct Replacement.