Enclave FWD V6-3.6L (2008)
6. Install the auxiliary A/C evaporator tubes (2) to the HVAC module (4) and install retaining nut (1).
Tighten the nuts to 16 N.m (12 lb ft).
7. Install auxiliary evaporator tubes to retaining clips and install nuts (3) to secure.
Tighten the nuts to 4 N.m (35 lb in).
8. Install the right rear inner wheelhouse liner if necessary.
9. Lower the vehicle.
10. Recharge the refrigerant to the system. Refer to Refrigerant Recovery and Recharging.
11. Leak test the fittings of the component using the J 39400-A.
