Enclave FWD V6-3.6L (2008)
6. Remove the power steering fluid reservoir outlet hose from the vehicle.
Installation Procedure
Important: Clip the power steering fluid reservoir hose in place in its original routing.
1. Install the power steering fluid reservoir outlet hose to the vehicle.
2. Connect the power steering fluid reservoir outlet hose (1) to the power steering pump.
3. Connect the power steering fluid reservoir outlet hose (1) to the remote power steering fluid reservoir.
4. Clean all excess fluid from the vehicle and remove the drain pans.
5. Fill and bleed the power steering system. Refer to Power Steering System Bleeding (See: Steering and Suspension/Steering/Power Steering/Power
Steering Bleeding/Service and Repair) .
6. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
