Enclave FWD V6-3.6L (2008)
19. Remove the power steering gear outlet hose bracket bolt (1).
20. Remove and discard the power steering gear outlet hose crimp clamp (2).
21. Disconnect the rubber segment from the metal segment of the power steering gear outlet hose (3, 4).
22. Remove any plastic retaining clips on the power steering gear outlet hose and discard them.
23. Remove the power steering gear outlet hose from the vehicle.
Installation Procedure
1. Install the power steering gear outlet hose to the vehicle.
2. Install a new power steering gear outlet hose clamp (2).
3. Connect the rubber segment to the metal segment of the power steering gear outlet hose (3, 4).
Notice: Refer to Fastener Notice .
4. Install the power steering gear outlet hose bracket bolt (1).