buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

All Other Service Bulletins for Wiring Harness:|10085D|Page 15915 > < All Other Service Bulletins for Wiring Harness:|10085D
Page 2
background image

"involved vehicles listing" before ordering parts. Normal orders should be placed on a DRO = Daily Replenishment Order. In an emergency situation,
parts should be ordered on a CSO = Customer Special Order. 

PN(s) 19118426 and 20968489 will not be eligible for RIM management.

* To obtain the Woven Polyester Electrical Tape (PET), contact Kent Automotive at 1-888-YES-KENT (1-888-937-5368) and request the special order
part number above.

Service Procedure

Replace Wire Harness Connector

2010 Chevrolet Malibu and 2010 Pontiac G6

Tools Required

-

J 38125-7 Crimp Tool

-

J 38125-6 Crimp Tool

Note

The service kit shown above is early production and does not contain the correct color wire seals. Replace connectors on both driver and passenger seats,
then reroute and attach the harnesses to the seat using the service kit.

1. Disable the SIR system. Refer to SIR Disabling and Enabling in SI.

Seat shown out-of-vehicle for illustration purposed

All Other Service Bulletins for Wiring Harness:|10085D|Page 15915 > < All Other Service Bulletins for Wiring Harness:|10085D