Enclave FWD V6-3.6L (2008)
1. Ensure the proper camshaft position actuator is installed. Observe the body of the camshaft position actuator for the EX marking (1). The marking
is for an exhaust camshaft position actuator.
2. Ensure the proper timing mark is used. Observe the outer ring of the camshaft position actuator for the circle marking (3). The marking is for
alignment to the highlighted timing chain link on the left side of the engine.
Important: Ensure that the camshaft timing chain and the camshaft position actuators are marked for proper assembly.
3. Align the exhaust camshaft actuator alignment mark (1) to the timing chain alignment mark (2) made during disassembly.
4. Ensure that the intake camshaft actuator alignment mark (4) and the timing chain alignment mark (3) are also aligned.
Important: Camshaft thrust washers must be installed on all 2007-2008 applications when servicing the camshaft position actuators, even if not
originally equipped with thrust washers.
5. Install the camshaft thrust washer.
