Enclave FWD V6-3.6L (2008)
Variable Valve Timing Solenoid: Service and Repair
Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 1 (Right Side) Intake
CAMSHAFT POSITION ACTUATOR SOLENOID VALVE SOLENOID REPLACEMENT - BANK 1 (RIGHT SIDE) INTAKE
REMOVAL PROCEDURE
1. Disconnect the engine wiring harness electrical connector (8) from the bank 1 intake CMP actuator solenoid valve.
2. Remove the CMP actuator solenoid valve bolt and valve (2).
3. Inspect the CMP actuator solenoid valve seal and replace as necessary.
INSTALLATION PROCEDURE
