Enclave FWD V6-3.6L (2008)
5. Remove the catalytic converter from the exhaust manifold.
6. Remove and discard the catalytic converter to exhaust manifold seal (1).
Installation Procedure
1. Install a NEW exhaust manifold seal (1) onto the catalytic converter.
2. Install the catalytic converter to the exhaust manifold.
Notice: Refer to Fastener Notice .
3. Install the catalytic converter brace bolt (2).
Tighten the bolt to 41 N.m (30 lb ft).
4. Install the exhaust flexible pipe. Refer to Exhaust Flexible Pipe Replacement (See: Engine, Cooling and Exhaust/Exhaust System/Exhaust
Pipe/Service and Repair) .
5. Install the catalytic converter to exhaust manifold nuts (1).