Enclave FWD V6-3.6L (2008)
1. Position a NEW throttle body gasket (1) and throttle body (2) to the upper intake manifold.
Notice: Refer to Fastener Notice.
2. Install the throttle body bolts (3).
Tighten the bolts to 10 N.m (89 lb in).
3. Connect the engine wiring harness electrical connector (2) to the electronic throttle control (1).
4. Install the air cleaner outlet duct.
5. Perform the throttle learn procedure. Refer to Throttle Learn. See: Procedures/Throttle Learn
