buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

ABOUT US
Ignition Coil(s) Replacement - Bank 1|Page 11152 > < Ignition Coil(s) Replacement - Bank 1|Page 11150

Enclave FWD V6-3.6L (2008)

Page 3
background image

1. Install the ignition coil(s).

Notice:  Refer to Fastener Notice.

2. Install the ignition coil bolt(s).

Tighten the bolt(s) to 10 N.m (89 lb in).

3. Connect the engine wiring harness electrical connector(s) (1) to the ignition coil(s) (4).

Ignition Coil(s) Replacement - Bank 1|Page 11152 > < Ignition Coil(s) Replacement - Bank 1|Page 11150