Enclave FWD V6-3.6L (2008)
Crankshaft Position Sensor: Diagnostic Aids
Using Fused Jumper Wires
Using Fused Jumper Wires
Tools Required
J 36169-A Fused Jumper Wire
Important: A fused jumper may not protect solid state components from being damaged.
The J 36169-A includes small clamp connectors that provide adaptation to most connectors without damage. This fused jumper wire is supplied with a
20-A fuse which may not be suitable for some circuits. Do not use a fuse with a higher rating than the fuse that protects the circuit being tested.
