Enclave FWD V6-3.6L (2008)
Air Flow Meter/Sensor: Service and Repair
Mass Airflow Sensor/Intake Air Temperature Sensor Replacement
Removal Procedure
1. Remove the air cleaner outlet duct.
2. Disconnect the engine wiring harness electrical connector (4) from the mass air flow (MAF)/intake air temperature (IAT) sensor.
3. Remove the MAF/IAT sensor screws (1).
4. Remove the MAF/IAT sensor (2) from the air cleaner assembly.
5. Remove the MAF/IAT sensor seal (3).
Installation Procedure
1. Install the MAF/IAT sensor seal (3) onto the MAF/IAT sensor.
2. Install the MAF/IAT sensor (2) to the air cleaner assembly.