Enclave FWD V6-3.6L (2008)
Positive: Service and Repair
Battery Positive Cable Replacement
Battery Positive Cable Replacement
Removal Procedure
Important:
*
Always use replacement cables that are of the same type, diameter and length of the cables that you are replacing.
*
Always route the replacement cable the same way as the original cable.
1. Disconnect the negative battery cable.
2. Remove the fuel injector sight shield.
3. Open the accessory wiring junction block cover (1).
4. Remove the accessory wiring junction block nut (2).
5. Remove the positive battery cable terminal (3) from the stud.
6. Remove the positive battery cable clip (5) from the multiuse relay bracket.
7. Push the positive battery cable grommet (6) in through the dash panel.