Enclave FWD V6-3.6L (2008)
14. Remove the generator bolts (2).
15. Remove the A/C compressor/evaporator hose bracket (1) from against the generator.
16. Remove the power steering fluid reservoir hose clip bracket (3) from against the generator.
17. Remove the generator (4) and idler pulley (5) together from the vehicle.
18. Remove the idler pulley from the generator.
Installation Procedure
1. Install the idler pulley (5) to the generator.
2. Install the generator (4) and idler pulley together to the vehicle.
3. Install the power steering fluid reservoir hose clip bracket (1) onto one of the generator bolts, and install the bolt finger tight.
4. Install the A/C compressor/evaporator hose bracket (2) onto the other generator bolt, and install the bolt finger tight.
Notice: Refer to Fastener Notice.
5. Tighten the idler pulley/generator bolts (2) in the following sequence:
