buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

All Technical Service Bulletins for Steering Column Position Sensor: > < Steering Angle Sensor|Locations|Page 16128
Page 1
background image

Steering Column Position Sensor: Customer Interest
Steering - Power Steering Column Inop./DTC B2860/B2880

TECHNICAL

Bulletin No.: 08-02-35-002

Date: March 12, 2008

Subject: 
Power Tilt/Telescope Steering Column Inoperative DTC B2860/B2880 Set (Replace Steering Column Tilt Wheel Position Sensor)

Models:
2008 Buick Enclave
2008 Cadillac CTS

with Power Tilt/Telescope Steering Column (RPO N38)

Condition

Some customers may comment that the power tilt/telescope steering column is inoperative.

A scan tool may reveal DTC B2860 and/or B2880 set.

Correction

Follow published DTC diagnostics. If it is determined to be a fault within the steering column tilt/telescope position sensor then replace the sensor with
P/N 25897117.

The steering column tilt/telescope position sensor is now available for service as a separate part. The sensor was formerly available only as part of the
entire steering column assembly. DO NOT replace the steering column assembly for this condition. Refer to the Steering Column Tilt Wheel Position
Sensor Replacement procedure in SI.

Parts Information

Warranty Information

For vehicles repaired under warranty, use the table.

Disclaimer

All Technical Service Bulletins for Steering Column Position Sensor: > < Steering Angle Sensor|Locations|Page 16128